The problem behind Drywall Mold Removal
Drywall absorbs water like a sponge. After a leak, flood or long term condensation, the board can look fine on the surface while the back is dark with growth. Painting over it or spraying it with cleaner does not reach the layers underneath.
Where Drywall Mold Removal fits in Boston
Plaster and lath were common in older Boston homes, but renovations over the decades added drywall to kitchens, bathrooms, basements and attic conversions. Those added layers are often where moisture problems show up first.
What Drywall Mold Removal covers
- Moisture checks to find the true edge of the damage
- Sealing the room and protecting floors and furniture
- Cutting out affected board in controlled sections
- Bagging debris in the work area to limit dust
- HEPA vacuuming and cleaning of the exposed framing
How the work proceeds, step by step
Find the edges
Moisture meters and careful probing reveal how far wet or moldy board extends.
Seal and protect
Plastic barriers and floor protection go up before any cutting.
Cut in sections
Board is scored and removed in manageable pieces to reduce airborne dust.
Bag in place
Debris goes straight into heavy bags in the work zone.
Clean the cavity
Studs and exposed surfaces are HEPA vacuumed and cleaned before drying.
Good to know before you call
Cutting a bit beyond the visible edge is standard practice. Mold can extend past what shows on the surface, and leaving a ring of damp board defeats the purpose.
Replacement should wait until the framing is dry. Closing up a wall with new board over damp studs just invites the same problem again, so drying checks come before rebuilding.
Questions about Drywall Mold Removal
Can moldy drywall be cleaned instead?
Light surface growth on a sound board might be cleaned, but significant growth or soaked board is usually removed.
Who replaces the drywall?
We handle the removal and cleaning. Rebuilding is typically done by a carpenter or drywall finisher.
